PicoVNA 108 and labview program

Discussions forum for our Sampling Oscilloscopes, VNA, and Pulse Generators
Post Reply
hahad
Newbie
Posts: 0
Joined: Wed May 22, 2024 8:21 am

PicoVNA 108 and labview program

Post by hahad »

I use picoVNA3 and the labview program, but the labview program cannot be used normally. Is it a problem with my operation or a temporary mismatch with the program?
Program gihub: https://github.com/picotech/picosdk-pic ... w-examples

If the program is OK, how do I do it correctly?
Secondly, I want to move the transmission antenna during the operation of VNA108, and then save it regularly through labview. Is this process possible?

Martyn
Site Admin
Site Admin
Posts: 4552
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PicoVNA 108 and labview program

Post by Martyn »

Please email in to support@picotech.com and the team can take a look at your setup and code.
Martyn
Technical Support Manager

Post Reply