Updating Time Fail

Maiz · Post by **Maiz** » Thu Jun 25, 2009 10:07 am

Hi,

I am currently having trouble programming the EL005 EnviroMon Data Logger. The logger is brand new and I am using it for the first time.

I have directly connected an EL001 convertor to the logger and an EL015 sensor to the converter. I am able to communicate with the logger and use auto-configure to recognise the convertor. However when I press program from the configuration control panel it starts to download the inormation to the logger but it always crashes out and displays the message "Updating time Operation failed"

Can anybody help!!

Best regards,

Maiz

ziko · Post by **ziko** » Thu Jun 25, 2009 10:41 am

Hi you will need to do a logload to the logger, full instructions can be found on the link below:

http://www.picotech.com/support/viewtopic.php?t=4038

Kind regards

Maiz · Post by **Maiz** » Thu Jun 25, 2009 10:56 am

Hi Ziko,

Thats worked perfectly.

Really appreciate your help.

Best regards,

Maiz

Test & Measurement Forum

Updating Time Fail

Updating Time Fail

Thank You!!