Electrical Engineering

Post your LabVIEW discussions here
Post Reply
Posts: 0
Joined: Wed May 04, 2022 11:36 am

Electrical Engineering

Post by GaryXie »

Hello,I am a novice using PicoScope. I have a 4824 PicoScope in my hand and want to transfer the collected data to LabVIEW for display and data processing. I have downloaded and installed the 64 bit ps4000a SDK and 32-bit LabVIEW on the windows computer. Although I checked the forum and GitHub tutorial, I still don't know how to connect it to LabVIEW. The VI downloaded from GitHub cannot run after it is opened. I hope a general version of picture or video tutorial can be produced to help novices learn to establish the relationship between PicoScope and LabVIEW.
Best wishes!

Posts: 329
Joined: Tue Oct 21, 2014 3:07 pm

Re: Electrical Engineering

Post by AndrewA »

You download - "64 bit ps4000a SDK and 32-bit LabVIEW"
Which won't work, you need to use 32-bit SDK and 32-bit LabVIEW or
64-bit SDK and 64-bit LabVIEW to work.
Regards Andrew
Technical Specialist

Post Reply