PicoScope 7 Software
Available on Windows, Mac and Linux
No error, but examples do nothing
No error, but examples do nothing
Hi,
I am using the PicoScope 5244B. I tried to start the examples PS5000a but only the PicoScope5000aExampleBlockMSO.vi shows an effect. By running this VI the Pico blinks green and you see something in the graph. But the picture do not change if i change the input of the Pico. If I run the other Examples nothing happens. I use Windows 10 and LabView 2018. What is wrong?
Thank You!
I am using the PicoScope 5244B. I tried to start the examples PS5000a but only the PicoScope5000aExampleBlockMSO.vi shows an effect. By running this VI the Pico blinks green and you see something in the graph. But the picture do not change if i change the input of the Pico. If I run the other Examples nothing happens. I use Windows 10 and LabView 2018. What is wrong?
Thank You!
Re: No error, but examples do nothing
What signal are you putting into the scope ?
What values are you running the vi's with (Voltage Range, Timebase, Trigger) ?
What values are you running the vi's with (Voltage Range, Timebase, Trigger) ?
Martyn
Technical Support Manager
Technical Support Manager