Time range

Forum for discussing PicoLog
Post Reply
Shinya
Newbie
Posts: 0
Joined: Mon Apr 08, 2019 11:13 pm

Time range

Post by Shinya »

Greetings,

I have been using the PicoLog 1216. The time range is set at 1m/s. I want to change the time range more closely, for example 0.25m/s or 0.1m/s.
How to change the settings?
Any suggestions ? Thank you.

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Time range

Post by Gerry »

Hi Shinya,

I'm not sure what you mean by time range. The smallest input sample interval that you can set in the latest version of PicoLog 6, for the PicoLog 1216 is 1ms (and the output sample rate can't be set any smaller than that). The smallest sample interval that you can have in the PicoLog 1216 is actually 1us, but you would need to use our PicoScope 6 software to be able to capture data at that sample rate.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply