Yoogawas flow input in PT104

Come here to introduce yourself, who you are, and what you do
Post Reply
sameer.skillful
Newbie
Posts: 1
Joined: Sat Feb 09, 2019 1:58 am

Yoogawas flow input in PT104

Post by sameer.skillful »

Hello I am from india.
1.I have bought pico pt 104 datalogger.
2.I want to read yokogawa flow meter reading onto it.
3.I tried voltage reading into pt 104.
4.I gave dc voltage input to pt104.but it's not giving correct graph.it's showing 1.05 volt whatever be my input.
Plz anyone help me.

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Yoogawas flow input in PT104

Post by Gerry »

Hi Sameer,

How do you know that the input voltage is "correct" (how are you measuring it)?

It would help us to help you if you could post a diagram, along with some images of how you have everything connected up (to the pins of the the terminal board). Also, if you could tell us what output range you are using for the flow meter, and post it's specification, that would help too. Finally, if you can also post a Picolog data file, we would be able to see how you have set up the software.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply