GM primary ignition testing

Which product is right for your exact requirements
Post Reply
johnfin
Newbie
Posts: 1
Joined: Sat Feb 09, 2019 7:41 pm

GM primary ignition testing

Post by johnfin »

I need to test the primary side of the ignition on a 4 wire coil (ls1 engine) Which cable of yours should I use and which pins on the coil to use. The pins are referenced as: voltage, signal, low ref and ground.
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: GM primary ignition testing

Post by Martyn »

Please repost on our Automotive Forum
Martyn
Technical Support Manager
Top
Post Reply

Return to “Pre-Sales Advice”