Hello. New user with a problem

Come here to introduce yourself, who you are, and what you do
Post Reply
wrenchx6
User
User
Posts: 2
Joined: Sat Oct 27, 2018 3:57 pm

Hello. New user with a problem

Post by wrenchx6 »

I'm an automotive technician in Texas, USA. I just bought a Pico 2204 and downloaded the auto version of Pico 6. When I plug my USB device into my laptop, the device appears in the list of USB devices on my task bar identified as PicoScope. However, when I start the Pico software, I get a warning message that no suitable device has been found. Would I like to run in demo mode? Is there anyone here who could help me resolve this issue? Thank you in advance, for any assistance that is offered.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Hello. New user with a problem

Post by Martyn »

You have purchased one of our Test and Measurement scopes which will not work with the Automotive or Diagnostic software, and will not give you access to the online waveform library.

Please contact support@picotech.com for further information.
Martyn
Technical Support Manager

wrenchx6
User
User
Posts: 2
Joined: Sat Oct 27, 2018 3:57 pm

Re: Hello. New user with a problem

Post by wrenchx6 »

Thank you Martyn

Post Reply