Pico Scope Current Clamp

Come here to introduce yourself, who you are, and what you do
Post Reply
dclar04
Newbie
Posts: 1
Joined: Mon Sep 10, 2018 1:47 pm

Pico Scope Current Clamp

Post by dclar04 » Mon Sep 10, 2018 1:56 pm

Hi, My name is Darren. I work as an electrical engineer for Hiab.
I have a question regarding current clamps.
We have a PicoScope3204A PC oscilloscope. I need to measure and record the current draw of a piece of kit that we are thinking of putting on our machines. Are the TA009 or TA018 model of current clamp compatible with our scope?

Martyn
Site Admin
Site Admin
Posts: 3724
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Pico Scope Current Clamp

Post by Martyn » Tue Sep 11, 2018 12:48 pm

Suitable probes are listed here including the TA018

The TA009 is the same as the TA018 but with 4mm plugs instead of the BNC connector so not directly compatible.
Martyn
Technical Support Manager

Post Reply