remarks on R6.1.0.4 software

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Endless Lasers
Newbie
Posts: 1
Joined: Sat Oct 25, 2008 11:33 am
Location: Netherlands

remarks on R6.1.0.4 software

Post by Endless Lasers »

after using this software for some days I have some qustions of fuctions i cant find or ideas for an update.

1. When i scroll through stored waveforms in the buffer i cant see the date-time stamp. I am happy it is on the printed output but i it would be real handy to see it on the screen also.

2. After recording a lot of data on different buffer screens i need to print them page by page, it would be nice to be able to print page 1 to XX in one command.

3. When a waveform is stored and later reopened, the data gathered in enhanced resolution is "raw" again, so with all distortion the enhanced mode filtered out so brilliantly at first.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi Endless Lasers,

Thank you for your suggestions I have put them through to the relevant people.

Kind regards
Ziko

Technical Specialist

Post Reply