Hello
I'm using the USB ADC11/12 data logger. To test the system i connected it to my PC (win xp).
To test the communication i use the usbadc11.xls excel programm from the SDK.
If i connect the datalogger i get the driver and device information. but the function "Ready = UsbAdc11Ready(handle)" the ready flag is always falls.
Does anybody have an idea how the get this system working?
best regards
USB ADC11/12 cant read data into excel
-
- User
- Posts: 8
- Joined: Thu Oct 09, 2008 7:33 am
-
- User
- Posts: 8
- Joined: Thu Oct 09, 2008 7:33 am
additional information
What i should mention is:
i can set the digital output, i get the calculated sample time from the
driver function.
maybe this additonal information helps to get closer to the failure
best regards
hofer tobias
i can set the digital output, i get the calculated sample time from the
driver function.
maybe this additonal information helps to get closer to the failure
best regards
hofer tobias
-
- User
- Posts: 8
- Joined: Thu Oct 09, 2008 7:33 am
-
- User
- Posts: 8
- Joined: Thu Oct 09, 2008 7:33 am
-
- User
- Posts: 8
- Joined: Thu Oct 09, 2008 7:33 am
Hi tobiashofer,
If you require any further support regarding this please email us on support@picotech.com.
Kind regards
If you require any further support regarding this please email us on support@picotech.com.
Kind regards
Ziko
Technical Specialist
Technical Specialist