ADC 16 thermocouple K

Post any questions about our serial port products
Post Reply
Posts: 1
Joined: Fri May 02, 2008 7:28 am
Location: london

ADC 16 thermocouple K

Post by nicolas.dimier » Fri May 02, 2008 7:44 am


I've got a ADC16 and thermocouples K. I'm asked to use thermocouples with this ADC 16, but I think I cannot use thermocouples directly plugged on ADC16, because of the cold junction, the amplification of the signal and the scaling factor.

Do I need a conditioner? Which one?

I'm just starting a new job and I wonder why a ADC16 has been choosen just to use thermocouples whereas the TC08 is made for that?


Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn » Fri May 02, 2008 8:11 am

Hello Nicolas,

You are correct regarding both the ADC-16 and TC-08, however, it is possible to adapt the ADC-16 to use a thermocouple, and that will require some work on your part.

Please review the information provided in the ADC-16 Teminal Board user guide ... ons-en.pdf


Post Reply