TC-08 can it record anything else?

Having problems ? let us know the details here
Post Reply
Brendan
Newbie
Posts: 1
Joined: Fri Feb 15, 2008 8:18 am
Location: Johannesburg

TC-08 can it record anything else?

Post by Brendan »

Greetings everybody. Just bought a TC-08 to monitor and evaluate a complex solar heater. I dont need all 8 temperature inputs. Was wondering if it was possible to somehow convert one or two channels into an on or off state, recorder, to monitor when certain pumps come on or go off, in relation to the temp. Obviously I am just talking about a basic on or off state. Any help or advice would be appreciated. Thanks all
Brendan.

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Hello Brendan,

The TC-08 can also measure voltage within the range +/- 70 mV; therefore, you could conceivably arrange for thresholds representing ON/OFF and monitor those in PicoLog.

Regards
John

Guest

Post by Guest »

This is exactly what I want to do with the TC-08.
Is the SE000 exposed wire probe "k" the correct thermocouple to use
and how?

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Ziko

Technical Specialist

Post Reply