advice please

Having problems ? let us know the details here
Post Reply
jfree
User
User
Posts: 2
Joined: Sat Oct 07, 2017 11:34 am

advice please

Post by jfree »

hi
not sure if this is in the right place ,but i have an old automotive 212 scope and have hardly used it .
any way i have an old laptop and the software set up on it and have started to use it to profile diesel injector reaction to time on a test bench ,trying to looking at the correction code of an injector , can some one please help me ?
i am trying to find out how to calculate the cycle deviation of an injector if i set the pressure and injector pulse width to a set figure
i have set the scope using the automotive actuator set up for diesel injector and attached a capture of one injector .is there a way to get the program to display the injection cycle deviation ?
Attachments
F0BEE1E6EBFAF4AA co1.psdata
this is a capture of one injector
(49.99 KiB) Downloaded 340 times

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: advice please

Post by Martyn »

You will probably get more help if you post on the Automotive Forum
Martyn
Technical Support Manager

jfree
User
User
Posts: 2
Joined: Sat Oct 07, 2017 11:34 am

Re: advice please

Post by jfree »

ok thanks
i will try in the auto forum

Post Reply