sensor EL015

Post any questions about our serial port products
Post Reply
jurisc
User
User
Posts: 2
Joined: Tue Nov 20, 2007 6:22 pm
Location: Latvia
Contact:

sensor EL015

Post by jurisc »

What factory made thermistor from sensor EL015 ? Rhopoint thermistor ACW-005 (30k) is similar, but further from +25C mistake amount 0,5C.
http://www.rhopointcomponents.com/images/accu-curve.pdf

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Hello Jurisc,

Would you please clarify what exactly is the problem with your EL015 sensor.

Regards
John

jurisc
User
User
Posts: 2
Joined: Tue Nov 20, 2007 6:22 pm
Location: Latvia
Contact:

Post by jurisc »

I bought logger TH-03 without sensors, because I need to measure pressure of water 0~6 bar and temperature until +120C. Use resistance box (tolerance +/-0,1 %) defined TH-03 characteristics with different sensor regime. I found the biggest TH-03 privilege - parameter scaling with equation.
It makes TH-03 unlimited opportunities use different sensors - thermistors, photoresistors, potentiometers... .

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Hello Jurisc,

It is pleasing that you are finding many different uses for your TH-03 and, we are happy to provide you with any reasonable support that we can. However, that support does not generally extend to providing details of individual component suppliers.

Regards
John

Post Reply