TC-08 Type K Thermocouple Selection
TC-08 Type K Thermocouple Selection
I'm looking at using the TC-08 to monitor the air temperature inside PC-based systems. The thermocouples would be secured to varies parts of the system using tape. Which type K thermocouple would be best suited for my application? Temperature range is 0C to 100C. Also, what is the standard length of the thermocouples? I need at least 3m.
- markspencer
- Site Admin
- Posts: 598
- Joined: Wed May 07, 2003 9:45 am
Hi,
We have a K type thermocouple that is 3 metres long it is exposed wire PTFE and can safely be used in temperatures of -75 deg C to +250 deg C.
For the full range of thermocouples that we supply please visit this webpage:
http://www.picotech.com/thermocouple.html#thermocouple
Best regards,
We have a K type thermocouple that is 3 metres long it is exposed wire PTFE and can safely be used in temperatures of -75 deg C to +250 deg C.
For the full range of thermocouples that we supply please visit this webpage:
http://www.picotech.com/thermocouple.html#thermocouple
Best regards,
Regards,
Mark Spencer
Mark Spencer
Where to buy?
Can I get the non-standard length thermocouples from a distributor? Or must I buy them directly from Pico? Do the non-standard length thermocouples have different part numbers?
- markspencer
- Site Admin
- Posts: 598
- Joined: Wed May 07, 2003 9:45 am