TC-08 Type K Thermocouple Selection

Which product is right for your exact requirements
Post Reply
Guest

TC-08 Type K Thermocouple Selection

Post by Guest »

I'm looking at using the TC-08 to monitor the air temperature inside PC-based systems. The thermocouples would be secured to varies parts of the system using tape. Which type K thermocouple would be best suited for my application? Temperature range is 0C to 100C. Also, what is the standard length of the thermocouples? I need at least 3m.

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

We have a K type thermocouple that is 3 metres long it is exposed wire PTFE and can safely be used in temperatures of -75 deg C to +250 deg C.

For the full range of thermocouples that we supply please visit this webpage:

http://www.picotech.com/thermocouple.html#thermocouple

Best regards,
Regards,

Mark Spencer

Guest

Where to buy?

Post by Guest »

Can I get the non-standard length thermocouples from a distributor? Or must I buy them directly from Pico? Do the non-standard length thermocouples have different part numbers?

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

You can get non standard thermocouples from us.

If you email me the thermocouples description (part no for standard) I will be able to give you a quote.

Alternatively, if you want to you can source them from elsewhere.

Best regards,
Mark S.
Regards,

Mark Spencer

Post Reply