Slow waveform update rate in scope mode

Post any questions you may have about our current range of oscilloscopes
Post Reply
hg_from_g
Newbie
Posts: 0
Joined: Thu May 25, 2017 10:27 am

Slow waveform update rate in scope mode

Post by hg_from_g »

13 wf/s
1ms/total, 125MSa/s --> 13 wf/s
1ms/total, 10MSa/s --> 14 wf/s
1ms/total, 1MSa/s --> 18 wf/s
1ms/total, 100kSa/s --> 20 wf/s

Why are there setting up to 60 wf/s in the preferences when never reach this?

Thank You so much!

hg
-->
Dear Forum,

on my PicoScope 3403D (usb3.0) the waveform update rate is only about 13 waveforms/s in scope mode. Because I want to view an audiosignal with analog feeling, I need at least 30 updates/s. Is there any way to increase it, on what it depends, is it a willful limit?

My measurements are:
1ms/total, 1Gsa/s --> 13 wf/s
1ms/total, 125MSa/s --> 13 wf/s
1ms/total, 10MSa/s --> 14 wf/s
1ms/total, 1MSa/s --> 18 wf/s
1ms/total, 100kSa/s --> 20 wf/s

Why are there setting up to 60 wf/s in the preferences when never reach this?

Thank You so much!

hg