opensue 15.1 Leap PicoScope asserts when time base >= 200ms/dv

Discussion forum for the new Picoscope Linux software
Post Reply
ChristianB
Newbie
Posts: 0
Joined: Tue Jul 21, 2020 10:58 pm

opensue 15.1 Leap PicoScope asserts when time base >= 200ms/dv

Post by ChristianB »

PicoScope Version: 6.14.23.580 asserts when a time base >= 200ms/div is selected and cursor reaches and of the drawing aera on openSuse Leap 15.1.
The error message is: mono: tpp.c:84: __pthread_tpp_change_priority: Zusicherung »new_prio == -1 || (new_prio >= fifo_min_prio && new_prio <= fifo_max_prio)« nicht erfüllt.
Any ideas to circumvent this issue are welcome.

Post Reply