Feedback wanted from our Linux users!

Discussion forum for the new Picoscope Linux software
Post Reply
Kieran
PICO STAFF
PICO STAFF
Posts: 41
Joined: Thu Jan 20, 2005 11:43 am
Location: St Neots, Cambridgeshire, UK

Feedback wanted from our Linux users!

Post by Kieran » Thu Apr 04, 2019 3:53 pm

Hi all Linux users of Pico software,

We're currently evaluating the needs of our Linux customers in terms of operating system/distro support. If you are a Linux user of PicoScope 6, PicoLog 6 or PicoSDK software and would like to take part in a short survey, please click here. It should take less than 5 minutes depending on how much or little you have to say!

Many thanks in advance for your feedback.

Kieran Winstanley
Product Manager
Kieran
Pico Technical Support
Forum Moderator

dnessett
Active User
Active User
Posts: 39
Joined: Tue Oct 16, 2018 10:30 pm

Re: Feedback wanted from our Linux users!

Post by dnessett » Sat Apr 20, 2019 3:39 pm

Hi Kieran,

I posted a response to this question a day or two ago, but was at the time concerned with PicoScope 6 becoming non-responsive. This is obviously a bug and doesn't really address your feedback question.

So, let me add one thing. The major enhancement I would like to see is ensuring the Windows and Linux versions of the software offer the identical features. For example, right now in the Windows version you can select the termination ohms used to calculate the dBm values output by the FFT algorithm. However, you cannot do that in the Linux version. The Linux version assumes dBm values are expressed using 600 ohms as the termination resistance. For RF work, this is not the correct assumption. So, I have to save the output spectrum using dBV units in .csv format and make the appropriate conversions myself. This is very inconvenient.

Thanks for the opportunity to provide input on this issue.

Regards,

Dan Nessett

bboyes
Newbie
Posts: 0
Joined: Tue Dec 25, 2018 2:20 pm

Re: Feedback wanted from our Linux users!

Post by bboyes » Sat Jun 15, 2019 4:40 pm

Please! Windows forced scans, updates and reboots are a huge headache. They can only be held off a few days and it is a big problem for us in remote logging applications.

elfasys
Newbie
Posts: 0
Joined: Thu Aug 15, 2019 9:07 am

Re: Feedback wanted from our Linux users!

Post by elfasys » Thu Aug 15, 2019 9:18 am

Hi !
The features I lacked were the possibility to add a previously captured trace to properly decode an SPI frame (storing the CS signal) and, maybe, the availability of advanced triggers (maybe due to the old age of my scope). Finally there is an issue with (Ubuntu 19.04) dark themes and PicoScope drop-downs where the background color is the same as the text. No very big deal since you can see the text when hovering (see attached picture).

This software is overall well supported and stable, nice job here !
Attachments
2019-08-15_11-14.png
The display issue, with 500mV hovered
2019-08-15_11-14.png (13.83 KiB) Viewed 845 times

DaveDay
Newbie
Posts: 0
Joined: Sat Oct 12, 2019 12:16 pm

Re: Feedback wanted from our Linux users!

Post by DaveDay » Sat Oct 12, 2019 12:24 pm

Inverting the trace seems to be missing. Or adding custom probes.

Frazer
Newbie
Posts: 1
Joined: Thu Nov 14, 2019 9:19 am

Re: Feedback wanted from our Linux users!

Post by Frazer » Sun Dec 08, 2019 12:14 pm

I have found that a fresh install of Picoscope 6 crashes on Ubuntu 18.04 LTS and Kubuntu 19.10. Installing libgdiplus seems to fix this. This library is not core in Ubuntu 18.04 LTS and later but does not appear to install as a dependency for Picoscope 6. There are a lot of people having this problem and it would seem to be an easy fix. A sticky link noting this would help and I can't imagine that this would require much of a change for an updated release.

AnalogueMan
Newbie
Posts: 0
Joined: Tue Feb 21, 2017 11:25 am

Re: Feedback wanted from our Linux users!

Post by AnalogueMan » Tue Dec 10, 2019 3:20 pm

Isn't it possible for you PicoScope software people to make a flatpack for the software so I can it also install it without having the risk of breaking my O.S. when somthing goes wrong?
My O.S. is PCLinuxOS-64bit KDE5

Psi
Newbie
Posts: 0
Joined: Mon Dec 23, 2019 10:36 pm

Re: Feedback wanted from our Linux users!

Post by Psi » Mon Dec 23, 2019 10:42 pm

elfasys wrote:
Thu Aug 15, 2019 9:18 am
Finally there is an issue with (Ubuntu 19.04) dark themes and PicoScope drop-downs where the background color is the same as the text. No very big deal since you can see the text when hovering (see attached picture).
Thats more a mono problem. I use picoscope with a light theme:

Code: Select all

$ GTK2_RC_FILES=/usr/share/themes/Breeze/gtk-2.0/gtkrc picoscope

Post Reply