Debian apt-get reports GPG error

Discussion forum for the new Picoscope Linux software
Post Reply
KernelPanic
Newbie
Posts: 0
Joined: Mon Mar 25, 2019 9:27 am

Debian apt-get reports GPG error

Post by KernelPanic » Sat Apr 06, 2019 7:55 am

Dear Sirs and Madams!

I've installed PicoScope software on Debian Linux and it works fine. However, when I update the system using

Code: Select all

sudo apt-get update && sudo apt-get upgrade && sudo apt-get dist-upgrade && sudo apt-get autoremove
I get following GPG error:
Get:9 https://labs.picotech.com/debian picoscope InRelease [3,654 B]
Ign:9 https://labs.picotech.com/debian picoscope InRelease
Fetched 187 kB in 0s (249 kB/s)
Reading package lists... Done
W: GPG error: https://labs.picotech.com/debian picoscope InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 6964D13AA2A43CCE
W: The repository 'https://labs.picotech.com/debian picoscope InRelease' is not signed.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
How do I retreive your public key (from Picotech) so this warning/error will dissapear?

Sincerely,
M.

Martyn
Site Admin
Site Admin
Posts: 3534
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Debian apt-get reports GPG error

Post by Martyn » Thu Apr 18, 2019 8:46 am

Code: Select all

wget -O - https://labs.picotech.com/debian/dists/picoscope/Release.gpg.key | sudo apt-key add -
Martyn
Technical Support Manager

KernelPanic
Newbie
Posts: 0
Joined: Mon Mar 25, 2019 9:27 am

Re: Debian apt-get reports GPG error

Post by KernelPanic » Thu Apr 18, 2019 8:50 am

It works, thanks!

Post Reply