Embedded scope in custom hardware

Come here to introduce yourself, who you are, and what you do
Post Reply
jacasey
Newbie
Posts: 1
Joined: Mon Dec 16, 2019 6:32 am

Embedded scope in custom hardware

Post by jacasey »

Hi -
I've used a 5000 series (4 chan w/ DSO) as an embedded acquisition tool inside a test fixture -- works fantastic, and your SDK is what really makes it sing.
I've now got another client impressed by this, and they want a fancy control system with a debugging embedded feature that looks a lot like a storage scope. Rather than reinvent the wheel, I could just bury about 8 channels plus DSO of your scope inside this unit.

I looked under the OEM page, but didn't see any details. Any chance I could buy a 5000 series as a "bare board" suitable for such (or I guess I could just unmount it from your classy box).

Any other ideas? Minimum needs appear to be 6 channels analog, 8 channels logic analyzer, SDK compatible, don't need high speed but do want fairly deep memory. It would be nice to get this on a very compact board, but design has no real physical constraints at this point.

Any help appreciated.
Jeff Casey
Rockfield Research Inc.
Las Vegas, NV
rockfieldresearch.com

Gerry
PICO STAFF
PICO STAFF
Posts: 1144
Joined: Mon Aug 11, 2014 11:14 am

Re: Embedded scope in custom hardware

Post by Gerry »

Hi Jacasey,

I apologise for the delay in answering your post (there has been a lot of other work that needed attention).

As this is more of a logistics/business issue could you send your request in to support@picotech.com,
and mark it for my attention.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply