Tc-08 adapter

Post any questions about our serial port products
Post Reply
Lwbsid
Newbie
Posts: 0
Joined: Sat Jan 28, 2023 2:01 pm

Tc-08 adapter

Post by Lwbsid »

Apologies for what is a basic question for you.
I am interested in a legacy TC-08 to use with K-type thermocouples for my dissertation.
Searching the forum for a direct answer is aiding.

Would a serial to usb adapter allow this logger to work with a modern laptop running Windows 11 with the downloadable software?
Does the software enable live readings on the laptop or would it be viewable from the recordings?

Many thanks for your help
Andre

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Tc-08 adapter

Post by Martyn »

The legacy serial port TC08 will not work with the current version of PicoLog 6 software. You will need to use the older PicoLog 5 software https://www.picotech.com/download/softw ... 5_25_3.exe which hasn't been tested on Windows 11 but does work with Windows 10.

You will be able to see live readings or run a data collection to store data over a period of time.
Martyn
Technical Support Manager

Andrew TC-08
Newbie
Posts: 0
Joined: Tue Jan 23, 2024 12:27 pm

Re: Tc-08 adapter

Post by Andrew TC-08 »

I am looking to do exactly the same; however, are there any specific requirements for the Serial to USB adaptor?

Andrew TC-08
Newbie
Posts: 0
Joined: Tue Jan 23, 2024 12:27 pm

Re: Tc-08 adapter

Post by Andrew TC-08 »

Could you also please confirm that the Pico Technology PR121 Thermocouple Terminal Board will work with Serial TC-08 using the legacy software

Post Reply