Picolog 1000 sampling interval

[sherzaad]

Hello,

I am currently using 1216 and using all 16 channel for datalogging and using picolog 6 to capture data in continuous mode.

within picolog 6, I can only see the smallest sample interval as 1ms.

however in the "picolog-1000-series-data-loggers-programmers-guide.pdf" document, it mentions that:

You can specify a sampling interval from 1 microsecond to 1 second.

so, Is it possible to have smaller time intervals (ie less that 1ms) in picolog 6?

Kindly advise.

[sherzaad]

Kindly advise...

[Martyn]

PicoLog6 is limited to 1ms sampling interval, if you need to sample faster you will have to write your own application using the SDK

[sherzaad]

I thought I might have to. Thank you for confirming