Picolog 1000 sampling interval

Post any questions you may have about our current range of USB data loggers
Post Reply
sherzaad
Newbie
Posts: 0
Joined: Tue Jun 06, 2017 3:43 pm

Picolog 1000 sampling interval

Post by sherzaad »

Hello,

I am currently using 1216 and using all 16 channel for datalogging and using picolog 6 to capture data in continuous mode.

within picolog 6, I can only see the smallest sample interval as 1ms.

however in the "picolog-1000-series-data-loggers-programmers-guide.pdf" document, it mentions that:
You can specify a sampling interval from 1 microsecond to 1 second.
so, Is it possible to have smaller time intervals (ie less that 1ms) in picolog 6?

Kindly advise.

sherzaad
Newbie
Posts: 0
Joined: Tue Jun 06, 2017 3:43 pm

Re: Picolog 1000 sampling interval

Post by sherzaad »

Kindly advise...

Martyn
Site Admin
Site Admin
Posts: 4197
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picolog 1000 sampling interval

Post by Martyn »

PicoLog6 is limited to 1ms sampling interval, if you need to sample faster you will have to write your own application using the SDK
Martyn
Technical Support Manager

sherzaad
Newbie
Posts: 0
Joined: Tue Jun 06, 2017 3:43 pm

Re: Picolog 1000 sampling interval

Post by sherzaad »

I thought I might have to. Thank you for confirming

Post Reply