New Scope purchase

Post any questions you may have about our current range of oscilloscopes
Post Reply
Rushayshay
Newbie
Posts: 0
Joined: Mon Nov 14, 2022 7:23 am

New Scope purchase

Post by Rushayshay »

Hi there,

Hope you receive this well, I am writing from New Zealand, and currently looking at buying a new scope mainly for automotive and electronics diagnosing purposes.
I have done a bit of research and wanted to check if the Pico scope AWG is capable of sending a pulse width signal at 0.2 duty cycle ? and also what impact would the Pico scope maximum output voltage of 2 volts have comparing to Tie pie which does from -12 to +12 volts ? Thanks

Martyn
Site Admin
Site Admin
Posts: 4246
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: New Scope purchase

Post by Martyn »

The answer to your question on AWG voltage it would depend upon exactly what you are trying to achieve, and what you are connecting to.

As this is our Test and Measurement forum if you require advice on using our devices for Automotive Diagnostics please repost your questions to our Automotive Forum https://www.picoauto.com/support/index.php or send your questions directly to the Auto team at support@picotech.com
Martyn
Technical Support Manager

Post Reply