PicoScope 2205A AWG: spikes after connect and disconnect

Post any questions you may have about our current range of oscilloscopes
Post Reply
andrshab
Newbie
Posts: 0
Joined: Thu Jan 09, 2020 4:04 pm

PicoScope 2205A AWG: spikes after connect and disconnect

Post by andrshab » Thu Jan 09, 2020 4:22 pm

Hello! I use AWG on PicoScope2205A. After connecting and disconnecting via MATLAB I see undesirable spikes. This problem is present on several picos 2205A. What is the reason of these spikes and how can I remove them?
Attachments
disconnect_micro.png
disconnect_macro.png
connect_micro.png
connect_macro.png

Gerry
PICO STAFF
PICO STAFF
Posts: 533
Joined: Mon Aug 11, 2014 11:14 am

Re: PicoScope 2205A AWG: spikes after connect and disconnect

Post by Gerry » Mon Jan 13, 2020 6:50 pm

This post is now being handled via the PicoTech Help Desk
Gerry
Technical Specialist

Post Reply