Do you plan to also monitor digital inputs with Picolog ?

Forum for discussing PicoLog
Post Reply
Lino
Newbie
Posts: 0
Joined: Wed Feb 13, 2019 9:28 am

Do you plan to also monitor digital inputs with Picolog ?

Post by Lino » Thu Jul 04, 2019 2:22 pm

Bonjour,
Do you plan to also monitor digital inputs with Picolog ?
There is currently no possibility with Picolog version 6.1.10 and the PicoScope 3406D MSO :(

Martyn
Site Admin
Site Admin
Posts: 3609
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Do you plan to also monitor digital inputs with Picolog ?

Post by Martyn » Fri Jul 05, 2019 8:51 am

There are currently no plans to include the digital channels in the PicoLog 6 software. If you can give the use case for their inclusion, explaining the types of signal you wish to monitor, I can put this forward to the development team for consideration.
Martyn
Technical Support Manager

Lino
Newbie
Posts: 0
Joined: Wed Feb 13, 2019 9:28 am

Re: Do you plan to also monitor digital inputs with Picolog ?

Post by Lino » Mon Jul 08, 2019 9:12 am

There are many cases of use in a laboratory. The latest is the monitoring of the output of several sensors subjected to climat tests for long periods but this is not the question.

The need to monitor the digital inputs is highly desirable and when I look at the old posts of this forum we see that it has already been expressed.

Post Reply