Math/digital channel export to CSV

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
AHall
Newbie
Posts: 0
Joined: Thu May 19, 2022 11:06 am

Math/digital channel export to CSV

Post by AHall »

I am using a PicoScope 3403D MSO to measure the output of a pressure sensor, with the measurement triggered using the digital MSO channels. I am taking advantage of the Math channel functions to do a real time conversion of the voltage data into pressure in bar.

When I export the data to CSV the Math channel appears to be converted from float to integer values, losing most of the information. The analogue voltage data is still saved as a float, however this is less convenient than being able to export the pressure data directly. If I disable the digital channels before exporting the data then the Math channel data is stored correctly.

I have attached an example dataset. Unfortunately the CSV files were too large to attach, but I can send these separately if needed.

Thanks,
Andrew

PicoScope version: 6.14.61.6219
Model: 3403D MSO
Driver Version: 2.1.82.3072
Firmware Version: 1.7.5.0 / 1.0.67.0
Attachments
Math channel export example.psdata
(19.94 KiB) Downloaded 12 times

Post Reply