Forum for discussing PicoScope version 6 (non-automotive version)
- Posts: 0
- Joined: Fri Apr 17, 2015 3:35 pm
We have a PicoScope 4423-19 and are trying to use it with the Windows Software PicoScope 6. When going to connect to the device we get a red exclamation mark that says,
The selected device is not supported by this version of PicoScope 6.
We are using software version 18.104.22.168 on Windows 7 operating system.
I have read the forums and it appears that it should work by reading topic14139.html?hilit=4423#p41311
- Site Admin
- Posts: 3757
- Joined: Fri Jun 10, 2011 8:15 am
- Location: St. Neots
The 4423-19 is not a standard 4423 scope and as such is not able to work with the standard software. It should have been supplied with the correct software.
Please contact firstname.lastname@example.org for further assistance
Technical Support Manager
- Posts: 0
- Joined: Sat Oct 24, 2015 7:53 am
Would you consider trading your scope for a 3424 scope. I'm trying to get my scope to work with the automotive
software but I'ts not happening..
- PICO STAFF
- Posts: 258
- Joined: Tue Oct 21, 2014 3:07 pm
The 3424 model is not automotive scope and hence will not work with Picoscope automotive versions of the software.
You can use the main test and measurement version - picoscope 6 with this scope - https://www.picotech.com/downloads/_lightbox/PicoScope6
PS - Standard Automotive models (3223, 3423, 4223, 4423 4225, 4425)will work with both versions of the software including Picodiagnostics.
Also as Martyn said the 4423-19 and scope models with the extra -XX digits are OEM models and will only work the OEM version of the software supplied with the scope.
- Posts: 0
- Joined: Sat Mar 20, 2010 6:15 pm
hello, I'm using old 4423 automotive scope.
I was testing one circuit with windows Picoscope 6 program and found out that triggering in REPEAT mode was working only 3 to 5 times total of 20 trials.
But pico automotive works without problems with success 20/20 fast tests.
Is this normal or should they work similar way in both programs ?
I prefer Picoscope 6 because of its Linux version,even it is missing a lot, probes + math channels , etc ..