Python support for usbtc08 - TC-08 Thermocouple Data Logger

Post general discussions on using our drivers to write your own software here
Post Reply
baruchl
Newbie
Posts: 0
Joined: Thu Jul 11, 2019 4:02 pm

Python support for usbtc08 - TC-08 Thermocouple Data Logger

Post by baruchl » Thu Jul 11, 2019 4:06 pm

Hello,
We have TC-08 and i want to connect to it via Python.
However, i read in Python readme page (https://github.com/picotech/picosdk-python-wrappers)
that this is an un-supported device.

1. Is that so? is there any plan to add support to it?
2. It seems like the github page doesn't allow to open issues...

NeilH
PICO STAFF
PICO STAFF
Posts: 145
Joined: Tue Jul 18, 2017 8:28 am

Re: Python support for usbtc08 - TC-08 Thermocouple Data Logger

Post by NeilH » Fri Jul 12, 2019 9:41 am

Hi

The TC-08 is supported now by our python repo, and the README has been updated to reflect this change.
Our Github pages don't allow opening issues as support is offered through either this forum or through email to support@picotech.com

Neil
Neil
Technical Support Engineer

baruchl
Newbie
Posts: 0
Joined: Thu Jul 11, 2019 4:02 pm

Re: Python support for usbtc08 - TC-08 Thermocouple Data Logger

Post by baruchl » Fri Jul 12, 2019 6:40 pm

Thank you NeilH. Excellent.

Post Reply