multiple XY displays

Which product is right for your exact requirements
Post Reply
metebalci
User
User
Posts: 3
Joined: Wed Mar 15, 2023 10:25 am
Location: Switzerland

multiple XY displays

Post by metebalci »

Can I have multiple XY views, for example Ch1 and Ch2 on one XY view and Ch 3 and Ch 4 on another XY view for a 4 channels scope ? If yes, is this available for all PicoScope series ? Is it possible to have more 4 different XY views with 8 channels scope ? Also if it is possible, is it possible to use the same channel in different XY views, eg Ch1 vs Ch2 and Ch1 vs Ch3 ?

Mete

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: multiple XY displays

Post by Martyn »

Yes you can have mutliple XY displays
Attachments
4 XY.png
Martyn
Technical Support Manager

metebalci
User
User
Posts: 3
Joined: Wed Mar 15, 2023 10:25 am
Location: Switzerland

Re: multiple XY displays

Post by metebalci »

Martyn wrote:
Thu Mar 16, 2023 8:14 am
Yes you can have mutliple XY displays
Thanks, I realized there is a demo mode and I checked the app and I think all I am asking can be done. So I decided to try 4424A.

A quick note, in PicoScope 7, I think the first window (scope) that opens by default cannot be closed, whereas in PicoScope 6 it can be closed.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: multiple XY displays

Post by Martyn »

If you use the Instruments button at the top you can change the first window to an XY one if you want.
Martyn
Technical Support Manager

metebalci
User
User
Posts: 3
Joined: Wed Mar 15, 2023 10:25 am
Location: Switzerland

Re: multiple XY displays

Post by metebalci »

Martyn wrote:
Thu Mar 16, 2023 10:07 am
If you use the Instruments button at the top you can change the first window to an XY one if you want.
OK, I made it. I should read the manual.

Post Reply