Picoscope 2000

Which product is right for your exact requirements
Post Reply
MikeLo
Newbie
Posts: 1
Joined: Thu Sep 05, 2019 6:46 am

Picoscope 2000

Post by MikeLo » Thu Sep 05, 2019 6:51 am

Hi,

I am looking at your picoscope 2000 series. I have a very specific use, I want to generate a 0.5Hz square wave for output - could you tell me if you have any oscilloscope in the 2000 range that can generate signals at that frequency?

Mike

bennog
Advanced User
Advanced User
Posts: 53
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Picoscope 2000

Post by bennog » Thu Sep 05, 2019 8:49 am

You can do this, be aware the maximum output is +/- 2V
The lowest my 3403D can do is 0.030 Hz, i suppose the 2000 series have the same limits.
This have to be confirmed from a picoscope official.

For higher voltages I have used this or this amplifier to get to +/- 30V (60V p-p)
I have modified it slightly so it has a 15x DC amplification.

Benno

CommanderLake
Newbie
Posts: 1
Joined: Mon Sep 09, 2019 9:12 pm

Re: Picoscope 2000

Post by CommanderLake » Mon Sep 09, 2019 10:22 pm

Also note the current output will be very small and the voltage may drop unless you use an amplifier.

Post Reply