PicoScope 7 Software
Available on Windows, Mac and Linux
analyze an incremental encoder
analyze an incremental encoder
Hello,
I have a Picoscope 3406D MSO and I would like to use it to analyze an incremental encoder from a motor. I would like to add a math channel that increments a counter on each rising edge and resets it with the Z-pulse from the encoder. This way, I want to determine the exact angular position of the motor. Is this possible with the Picoscope? Unfortunately, I haven't been able to find a suitable function.
Thank you very much.
I have a Picoscope 3406D MSO and I would like to use it to analyze an incremental encoder from a motor. I would like to add a math channel that increments a counter on each rising edge and resets it with the Z-pulse from the encoder. This way, I want to determine the exact angular position of the motor. Is this possible with the Picoscope? Unfortunately, I haven't been able to find a suitable function.
Thank you very much.
Re: analyze an incremental encoder
Have you tried using the Quadrature Serial Decoder?
Martyn
Technical Support Manager
Technical Support Manager