Setting up Eye Diagram in 9301-15

Discussions forum for our Sampling Oscilloscopes, VNA, and Pulse Generators
Post Reply
sdpal
Newbie
Posts: 0
Joined: Mon Dec 13, 2021 9:16 am

Setting up Eye Diagram in 9301-15

Post by sdpal »

Hi,
I have recently bought Picoscope 9301-15 for testing high frequency RF signals. I wish to see the eye diagram but currently able to see only time domain regular plot of the signal. I want your advice on setting up the scope so that eye diagram is possible to see. I have tried to go with persistence mode on and getting no update.

Thanks for helping me out in advance.

Best wishes,
S. Pal

Martyn
Site Admin
Site Admin
Posts: 4483
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Setting up Eye Diagram in 9301-15

Post by Martyn »

Can you please email support@picotech.com we can then put you in touch with the RF team who can guide you through the use of the PicoSample 3 software with your signals.

Alternatively you can watch the video here https://www.picotech.com/library/videos ... 000-series bout half way through for Eye Diagram setup.
Martyn
Technical Support Manager

Post Reply