Frequency Response Analyzer with Bode Plots

Post discussions on applications you are writing
Post Reply
Martyn
Site Admin
Site Admin
Posts: 3469
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Frequency Response Analyzer with Bode Plots

Post by Martyn » Mon Feb 11, 2019 8:09 am

Thank you for this.
Not sure why you were unable to post the files, the file limit is at least 10Mb, so I have added them
Attachments
ImpedanceViewer1002.zip
(424.95 KiB) Downloaded 25 times
Martyn
Technical Support Manager

_Wim_
Advanced
Posts: 0
Joined: Sun Nov 12, 2017 11:31 am

Re: Frequency Response Analyzer with Bode Plots

Post by _Wim_ » Mon Feb 11, 2019 8:16 am

Thanks for uploading the file here also. For me, the file limit was/is limited to 256K?! Could this be related to the number of post? Just tried again to upload a dummy file of 5mB, could not attach it..

_Wim_
Advanced
Posts: 0
Joined: Sun Nov 12, 2017 11:31 am

Re: Frequency Response Analyzer with Bode Plots

Post by _Wim_ » Mon Feb 11, 2019 7:57 pm

Full source code is available at:
https://github.com/WimHuyghe/FRA-Impedance-Viewer

hexamer
Advanced User
Advanced User
Posts: 0
Joined: Tue Aug 12, 2014 10:09 pm

Re: Frequency Response Analyzer with Bode Plots

Post by hexamer » Thu Feb 14, 2019 4:22 am

_Wim_ wrote:
Mon Feb 11, 2019 7:57 pm
Full source code is available at:
https://github.com/WimHuyghe/FRA-Impedance-Viewer
Very nice work, Wim! I'll have to try this our soon.

BTW, this is one of the kinds of application I had in mind when I made the API version of FRA4PicoScope. Had you considered integrating it that way? Should be pretty easy with C#.

_Wim_
Advanced
Posts: 0
Joined: Sun Nov 12, 2017 11:31 am

Re: Frequency Response Analyzer with Bode Plots

Post by _Wim_ » Thu Feb 14, 2019 6:44 pm

Hi Hexamer,

Thanks for your comments. I was not aware an API version of your app was available. I will definitely look into that. I briefly first considered changing your app, but as I am not a C++ guy, and also not familiar with the PLPlot lib, that seemed a bit too much work. Wrapping a dll and using it in C# however should be fairly straight forward.

Post Reply