Help on a project

Post discussions on projects you are working on
Post Reply
craighome
Newbie
Posts: 0
Joined: Sun Feb 09, 2020 12:51 pm

Help on a project

Post by craighome » Sun Feb 09, 2020 12:56 pm

Hi,

What I would like to be able to do is record the signals coming into an RGB 3.3v led, which would include voltage, duty cycles, phase etc for each colour red, green and blue.

I would then like to be able to generate some form of playback file from an arduino that could output a pwm signal to replicate the original logging and drive the same RGB led.

Any help appreciated on this - willing to pay for someone to help me if it's a custom job.

Many thanks

Craig

bennog
Advanced User
Advanced User
Posts: 60
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Help on a project

Post by bennog » Mon Feb 10, 2020 6:52 pm

can you tel what kind of 3.3V RGB signal
there are a lot of libraries that can do most known RGB signals to leds.

Benno

Post Reply