Software for Mac

Discussion forum for the Picoscope 6 Mac software
Gerry
PICO STAFF
PICO STAFF
Posts: 953
Joined: Mon Aug 11, 2014 11:14 am

Re: Software for Mac

Post by Gerry »

Hi olivermac,

Check your operating system version against the ones I mentioned in the previous post, otherwise, try the following:

Right-click (or ctrl+click) on the installer and select "Open". If you then see the same warning notice again, but with an additional "Open" button, click on it to run the installer. Failing that, have a look an explanation and solutions posted here: https://www.minicreo.com/mac-uninstalle ... alina.html.

Regards,

Gerry
Gerry
Technical Specialist

Gerry
PICO STAFF
PICO STAFF
Posts: 953
Joined: Mon Aug 11, 2014 11:14 am

Re: Software for Mac

Post by Gerry »

Hi Oliver,

What OS version are you attempting to install it on?

Regards,

Gerry
Gerry
Technical Specialist

DwightG
Newbie
Posts: 0
Joined: Sat Feb 16, 2019 12:42 pm

Re: Software for Mac

Post by DwightG »

Morning Gerry, just a brief Q that I've seen asked previously about earlier versions.

Will I be able to connect and run more than 1 scope at a time per application, or even run two instances of Picoscope simultaneously?

Would be a great feature that I'm sure people would be more than happy to see.
Thanks.

paulrbarnard
Newbie
Posts: 1
Joined: Wed Aug 23, 2017 10:24 am

Re: Software for Mac

Post by paulrbarnard »

Can someone point me at a version for PicoScope software for the Mac? I have installed a VM running an earlier version of MacOS so I can run the Beta but I can't find an install file for V6 Beta on the Picotech downloads page.

davidfokkema
Newbie
Posts: 0
Joined: Mon Apr 26, 2021 7:32 pm

Re: Software for Mac

Post by davidfokkema »

Not sure if this is still relevant for you, but it is here:

Picotech.com -> downloads -> choose your oscilloscope -> Mac -> PicoScope 6.14.44. Direct link: https://www.picotech.com/downloads/_lig ... oscope6mac.

Post Reply