Keyboard Value entries don't work

Discussion forum for the new Picoscope Mac software
Post Reply
stfarley
Newbie
Posts: 0
Joined: Tue Aug 21, 2018 11:14 am

Keyboard Value entries don't work

Post by stfarley » Thu Dec 06, 2018 12:41 pm

One thing I have noticed is that using the keyboard to change any of the values in the settings boxes. (i.e. adjusting the amount of pre -trigger) has no effect. The Display changes but the actual used value doesn't.
The Arrows to either side of the box do work.

Gerry
PICO STAFF
PICO STAFF
Posts: 293
Joined: Mon Aug 11, 2014 11:14 am

Re: Keyboard Value entries don't work

Post by Gerry » Fri Dec 07, 2018 1:54 pm

Hi stfarley,

Could you post a psdata file so we can see what you mean.

Regards,

Gerry
Gerry
Technical Specialist

stfarley
Newbie
Posts: 0
Joined: Tue Aug 21, 2018 11:14 am

Re: Keyboard Value entries don't work

Post by stfarley » Fri Dec 07, 2018 2:17 pm

Hmm,

For some reason the system doesn't seem to allow me to add a file.
The select file box opens, but after selecting the file to attach it just goes away.

The example I was sending was simply selecting the pre-trigger window and changing the value with the keyboard. It then show 50% bit the pretrigger is still set to 10%.

Post Reply