How to get pico scope software for legacy model

Forum for discussing PicoScope (version 5)
Post Reply
N Yokouama
Newbie
Posts: 0
Joined: Sun Oct 20, 2019 2:57 pm

How to get pico scope software for legacy model

Post by N Yokouama »

Dear sirs,

I have a legacy pico scope hardware model 3206B.
I used it with PICO 6 scope software with the OS Windows 7.
Recently, I upgraded the OS to the Windows 10.

For that reason, I wonted to down load a suitable scope software.
I visited pico URL, but I was not able to find a suitable software for my 3206B hardware.

Q1) Is there any suitable softere for my 3206B old hardeare?
Q2) If yes, please let me know how to get it.

Thank you in advance & Best regards,

N Yokoyama

NeilH
PICO STAFF
PICO STAFF
Posts: 265
Joined: Tue Jul 18, 2017 8:28 am

Re: How to get pico scope software for legacy model

Post by NeilH »

Hi

You can download software for your device by going to our downloads page www.picotech.com/downloads and finding your device under the discontinued products list

Neil
Neil
Technical Support Engineer

N Yokouama
Newbie
Posts: 0
Joined: Sun Oct 20, 2019 2:57 pm

Re: How to get pico scope software for legacy model

Post by N Yokouama »

Dear Neil, Supoet engineer

Thanks q lot for your quick reply.
I was able to download the software for my device 3206B hardware,

I should have paid stronger attention on the discontinued product.
Sorry for taking your time, but I am happy now.

N Yokoyama

Post Reply