Can't install PicoScope 6 W7 64 Bit

Post any questions you may have about our current range of oscilloscopes
Post Reply
Posts: 0
Joined: Sat Oct 01, 2011 9:47 pm

Can't install PicoScope 6 W7 64 Bit

Post by jbaker » Sat Oct 01, 2011 10:02 pm

(180.87 KiB) Downloaded 363 times
Hello -

I am trying to install the Pico Scope software on a Dell Studio 1558 Lptop running Windows 7 64 bit OS. I have downloaded the latest software with no luck. The installation proceeds and then a Roll Back is performed. The message indicates the installation process was interrupted. I created a log file as suggested in an earlier post. It is attached. I have successfully used the PicoScope 3204 on a previous machine running Windows XP. Can anyone help?


Site Admin
Site Admin
Posts: 3639
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Can't install PicoScope 6 W7 64 Bit

Post by Martyn » Tue Oct 04, 2011 7:15 am

Check that the .NET Framework Version 2.0, required by PicoScope6, is not corrupt by reinstalling it ... g=en&id=19

and ensure that no Picoscope hardware is attached to the PC during installation of the software.
Technical Support Manager

Post Reply