Test and Measurement Forum

pH and Redox simultaneously over USB-DrDAQ

Post any questions you may have about our current range of USB data loggers

pH and Redox simultaneously over USB-DrDAQ

Postby Jeff Spedding » Wed Sep 28, 2011 7:51 am

I have just acquired a USB DrDAQ. I have a pH electrode attached over the appropriate BNC connection. I want to log a Redox value parallel to the logged pH value at the same time. Can I attach the Pico Redox electrode over another input such as Ext1 and measure Redox as a mV voltage? Can I add a very high resistance accross the input to simulate the character of the pH (BNC) input? Do I need a second DrDAQ for this? Up to now, we normally have used ADC-24 or 1216 for this with two separate pH/Redox meters.
Jeff Spedding
Newbie
 
Posts: 1
Joined: Fri Jan 09, 2009 4:08 pm

Re: pH and Redox simultaneously over USB-DrDAQ

Postby Martyn » Mon Oct 03, 2011 8:38 am

The same approach you have used with the ADC-24 and 1216 would work with the DrDaq Ext inputs. Alternatively you would need to use a second DrDaq.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests