Test and Measurement Forum

Help VB

Post any questions you may have about our current range of oscilloscopes

Help VB

Postby hbkhum » Fri Sep 23, 2011 12:09 am

I need your help, I have a PicoScope 2205, but I get the correct measurement to put the measure a 1.5-VDC battery (AA) but with the fast or Start Streaming option, I do not consider the values ​​are not correct.

Are the same values ​​by placing the oscilloscope probe or as if it were not
Might help to know what the reason or just guide me to see correct results of measurements please thanks!
Posts: 0
Joined: Thu Sep 22, 2011 11:53 pm

Re: Help VB

Postby Martyn » Mon Sep 26, 2011 9:30 am

Can you try the Picoscope software to see if that is giving the correct values. If it is reading correctly then we will need to see your code to be able to assist you.
Technical Support Manager
Site Admin
Site Admin
Posts: 3219
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests