TC-08 x64 drivers

Post any questions you may have about our current range of USB data loggers
Post Reply
crmaris
Newbie
Posts: 0
Joined: Mon Sep 12, 2011 6:03 pm

TC-08 x64 drivers

Post by crmaris » Mon Sep 12, 2011 6:05 pm

Hello. Because I didn't find any information on this. Are there any x64 drivers for the usb TC-08 (windows 7).

Thanks!

Hitesh
Site Admin
Site Admin
Posts: 2793
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: TC-08 x64 drivers

Post by Hitesh » Tue Sep 13, 2011 1:39 pm

Hi,

There currently aren't any 64-bit specific drivers for the TC-08 although our 32-bit dlls for Windows will work on 64-bit Windows Operating Systems.

Regards,
Hitesh

Technical Support Engineer

crmaris
Newbie
Posts: 0
Joined: Mon Sep 12, 2011 6:03 pm

Re: TC-08 x64 drivers

Post by crmaris » Fri Sep 16, 2011 2:01 pm

Thanks for the reply!

So when I connect the usb TC-08 to a windows 7 x64 machine using the x86 drivers it will be recognized correctly, right?

Because although may dlls be compatible with X64 if the windows can't recognize the TC-08 then how you can program it.

Hitesh
Site Admin
Site Admin
Posts: 2793
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: TC-08 x64 drivers

Post by Hitesh » Fri Sep 16, 2011 3:24 pm

The TC-08 will be recognised by Windows 7 64-bit.

Have you installed PicoLog first or are you looking to install the driver only, then use it with the SDK?

The recommended method to install the driver is using PicoLog, however, if you wish to install the driver only, the KernelDrivers.txt file in the SDK describes which driver to install.
Hitesh

Technical Support Engineer

Post Reply