Test and Measurement Forum

Pico USB-parallel adaptor with ADC-212/100

Post any questions about our parallel port products

Pico USB-parallel adaptor with ADC-212/100

Postby Baky » Mon Sep 05, 2011 1:19 pm

Hello!

I installed Pico PicoFull_r5_21_2 for an ADC-212/100 device using Pico USB-parallel adaptor on Windows 7 32-bit. During the installation I selected the appropriate device (ADC-212) and port USB-PP1; so far, so good!

After the installation I connected the device via USB-parallel adaptor and everything has worked. I restart my pc and tried to start Picoscope but this time it hasn't worked!

I redid the same procedure on a VMware disc with Windows XP SP3; exactly the same it worked only once!

Any hint?!

Thank you.
Baky
Newbie
 
Posts: 0
Joined: Mon Sep 05, 2011 12:55 pm

Re: Pico USB-parallel adaptor with ADC-212/100

Postby Martyn » Tue Sep 06, 2011 6:29 am

When you restart the PC is the device plugged in or not ?
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2351
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Pico USB-parallel adaptor with ADC-212/100

Postby Baky » Tue Sep 06, 2011 8:08 am

No. It's not plugged in.
Baky
Newbie
 
Posts: 0
Joined: Mon Sep 05, 2011 12:55 pm

Re: Pico USB-parallel adaptor with ADC-212/100

Postby Martyn » Tue Sep 06, 2011 8:50 am

Try plugging the adaptor in without the ADC212 attached, and then connect it to the adaptor. Alternatively try the Picoscope6 Automotive Software http://www.picoauto.com/software.html which supports the ADC212.

If neither of these work then please contact the support team at support@picotech.com and they can discuss your specific setup in more detail.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2351
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Pico USB-parallel adaptor with ADC-212/100

Postby Baky » Wed Sep 07, 2011 4:11 pm

It works with Picoscope6 Automotive software!

Thank you!
Baky
Newbie
 
Posts: 0
Joined: Mon Sep 05, 2011 12:55 pm


Return to Parallel Port Products

Who is online

Users browsing this forum: No registered users and 0 guests