Test and Measurement Forum

holdoff

Post any questions you may have about our current range of oscilloscopes

holdoff

Postby franceconve » Sat Sep 03, 2011 6:22 pm

Hi all,
I have a 2205 oscilloscope and I need of a trigger function usually available in other oscilloscope: the Hold-Off. With this trigger function is possible to specify a certain period following a trigger event during which the scope will not trigger again. I have search this function in the advanced trigger but I hanev't found.
Could you help me?
Francesco
franceconve
Newbie
 
Posts: 1
Joined: Mon Jun 08, 2009 8:10 pm

Re: holdoff

Postby Martyn » Mon Sep 12, 2011 9:20 am

Francesco,
Can you give some details on your specific application and we can advise you of the best way to achieve this with our scopes.

Kind regards,
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2338
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: holdoff

Postby franceconve » Mon Sep 12, 2011 6:42 pm

I need to trigger repetitive signal, coming from serial port, with some irregularities that does not permit to have stable display with other trigger strategies.
franceconve
Newbie
 
Posts: 1
Joined: Mon Jun 08, 2009 8:10 pm

Re: holdoff

Postby Martyn » Mon Sep 19, 2011 1:45 pm

I have a few more questions regarding your setup :-

Are the irregularities correctly formatted serial data or just noise ?
What is the nature of the repetitive signal ? actual data, data rate, jitter ?
What are you looking for when examining the signal trace ?
Are you using the serial decoding functionality of our software ?

Thanks
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2338
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests