N o Filtering for Channel C and D

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
xyliu
Newbie
Posts: 0
Joined: Mon Mar 22, 2010 4:45 pm

N o Filtering for Channel C and D

Post by xyliu » Tue Aug 30, 2011 10:53 pm

After I open a picoscope data file from 4424, I could do low pass filtering to channel A and B. However, there is no icon to activate filtering for Channel C or D. Is this a software bug?

Martyn
Site Admin
Site Admin
Posts: 3345
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: No Filtering for Channel C and D

Post by Martyn » Wed Aug 31, 2011 6:59 am

Which version of Picoscope 6 software are you using ?
Martyn
Technical Support Manager

xyliu
Newbie
Posts: 0
Joined: Mon Mar 22, 2010 4:45 pm

Re: N o Filtering for Channel C and D

Post by xyliu » Wed Aug 31, 2011 8:32 pm

PicoScope 6.5.80.5

Martyn
Site Admin
Site Admin
Posts: 3345
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: N o Filtering for Channel C and D

Post by Martyn » Thu Sep 01, 2011 8:28 am

Can you send me a copy of the psdata file to support@picotech.com and I will take a look as it appears to work fine on my version of 6.5.80.5 so may be something in the file.

Regards,
Martyn
Technical Support Manager

Post Reply