Test and Measurement Forum

ADC200/212 connection

Post any questions about our parallel port products

ADC200/212 connection

Postby HTDesign » Fri Aug 12, 2011 2:16 pm

I have an ADC-200, and two ADC=212s that I have inherited from the original purchaser, JCI Ltd. I had one of the ADC-212s working on a windows XP laptop via a pcmcia/parallel adaptor. The laptop died. I find that I cannot get either of two windows 98 computers to recognise any of the ADCs, despite downloading PicoFull_r5_16_2.exe several times from your website. I have tried all combinations of the ADCs, computers and two printer cables (full 25-way). I have tried setting printer ports via setup to standard/ecp/epp to no avail.

Where am I going wrong?

Help please!
HTDesign
 

Re: ADC200/212 connection

Postby ziko » Mon Aug 15, 2011 8:08 am

Hi please have a look at the knowledge base article below:

kb/Miscellaneous-kb243

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: ADC200/212 connection

Postby walge » Sat Feb 11, 2012 7:52 pm

Hi,

please give me an idea about a trouble with a desktop with win98SE and lpt with adc212-50 parallel.
I need to use this pc because I have Audio Precision Syst. One connected on LPT1 ( basic port) and it is running.
I bought a parallel pci card, I configured it as LPT2 then I downloaded the sw 5.16.2 foe Win98; after the installation it doesn't work.
What's wrong?

Thx in advance

Walter
walge
Newbie
 
Posts: 0
Joined: Sat Feb 11, 2012 7:45 pm

Re: ADC200/212 connection

Postby Martyn » Mon Feb 13, 2012 2:42 pm

Have you checked the knowledge base article in the previous post. It mentions that you need WinXp or later to work.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: ADC200/212 connection

Postby walge » Tue Feb 14, 2012 9:33 am

Hy Martin,

thx for answer but my problem is to reach the possibility to work with one pc with two software.
The Apwin for Audio precision System One works with win98, no other chance ( :( ).
From your answer I suppose that there isn't a solution, right?

Walter
walge
Newbie
 
Posts: 0
Joined: Sat Feb 11, 2012 7:45 pm

Re: ADC200/212 connection

Postby Martyn » Tue Feb 14, 2012 11:53 am

Unfortunately in this instance there is no solution that we can suggest. Sorry.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to Parallel Port Products

Who is online

Users browsing this forum: No registered users and 0 guests