ADC-212

Post any questions about our parallel port products
Post Reply
ljosborne27

ADC-212

Post by ljosborne27 »

ADC-212 with automotive was installed on my old laptop.Not sure what version it was but I had the ability to add custom probes ,record data up to 1000 frames ect.When I had to replace my laptop due to a hard drive failure I can no longer find a software version newer than 5.2 I believe it is.Wondering how to get it back to where it was.Any help would be nice it has been a couple monthes now Thanks LJ

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: ADC-212

Post by Martyn »

You can download software from our website at http://www.picotech.com/software.html

Select the appropriate product at Step 1 and you are offered different versions of software at Step 2

If you can't find what you require then please contact us through our support desk at support@picotech.com

Kind regards
Martyn
Technical Support Manager

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: ADC-212

Post by PeterF »

Hi,
I think you were actually using the automotive version of PicoScope6, which will run on the ADC-212. It is available here:-
http://www.picoauto.com/download.html?s ... &x=87&y=15
(No other parallel port scopes will work with it though.)
Regards,
PeterF.

Post Reply