TV repair

mr2u · Post by **mr2u** » Sat Jul 03, 2004 11:43 am

Hi.
For Television repairing.
My question are which model is suitable for this task and do I need to have the unit calibrated .
Thanks or your time and helping

markspencer · Post by **markspencer** » Mon Jul 05, 2004 7:43 am

Hi,

Thank you for your request with regards to our products.

The units that are most appropriate for TV testing is the ADC-212 series and ADC-200 series. The unit that is required will depend on the highest signal that you anticipate measuring.

I would advise you look at the specifications for the above adn contact me again with any other questions you have.

Best regards,

mr2u · Post by **mr2u** » Mon Jul 05, 2004 12:38 pm

Thanks .
How about the new model 3204 ( only 8bit ) . Do I need 12 bit ? or this model is good enough to handle the tuner frequencies ?
Again thanks or the help

ricardo · Post by **ricardo** » Tue Jul 06, 2004 9:00 am

Hi,

Thank you for your enquiry. The PicoScope 3204 should be capable of handling those frequencies and 8 bits is definitely enough.

Best Regards,

Ric

mr2u · Post by **mr2u** » Tue Jul 06, 2004 3:34 pm

You're great. Look like 3204 is my new toy or this summer.
One last question, Do I have this 3204 calibrate ?
Thanks

ricardo · Post by **ricardo** » Wed Jul 07, 2004 7:22 am

Hi,

The 3204 will already come calibrated

However if you want a calibration certificate this will cost you extra.

Best Regards,

Ric